Ravenol

Category: Passenger car motor oil

Item number: 1111133

Viscosity: 5W-40

Specification: ACEA C3, API CF, API SN

Oil type: Synthetic

Approvals: API SN, BMW Longlife-04, GM dexos2™ (Lizenz-Nr. D20583HI081), MB-Freigabe 229.31, MB-Freigabe 229.51, VW 505 00, VW 505 01

Recommendation: Chrysler MS-11106, Fiat 9.55535-GH2, Fiat 9.55535-S2, Ford WSS-M2C917-A, Porsche A40, VW 502 00

Application: Passenger car

Technology: Clean Synto®

RAVENOL VMO SAE 5W-40 is a synthetic Mid SAPS low friction motor oil with CleanSynto® technology for passenger car gasoline and diesel engines with and without turbo-charging and direct injection.

RAVENOL VMO SAE 5W-40 achieves a high viscosity index through its formulation with special base oils. The excellent cold start behaviour provides an optimum lubricating safety during the cold run phase.

RAVENOL VMO SAE 5W-40 extends long life of DPF and TWC. Developed for fuel economy and energy conserving in EURO VI, EURO V and EURO IV Standard engines with normal and extended oil change intervals (until 50.000 km or 2 years possible).

RAVENOL VMO SAE 5W-40 minimizes friction, wear and fuel consumption with excellent cold start characteristics. Because of a considerable fuel saving RAVENOL VMO SAE 5W-40 contributes to protect the environment by reducing the emissions.

Suitable for extended oil change intervals where recommended by manufacturer.

Application Note

RAVENOL VMO SAE 5W-40 is an universal, synthetic low friction motor oil especially developed for Pumpe-Düse-diesel engines. Moreover, this lubricant is excellent suitable for gasoline and diesel engines in passenger cars and vans with and without turbo charger. Due to the specific composition is RAVENOL VMO SAE 5W-40 excellent suitable for use for several OEM requirements.

Characteristics

• Fuel economy in part and full power operation.
• MID SAPS = reduced Sulphated Ash, Phosphorous and Sulphur.
• Excellent wear protection and high viscosity index also under high-speed driving conditions, the long life of the engine.
• Excellent cold starting characteristics also at low temperatures below -30°C.
• The function of the hydro tappet is ensure at all temperatures.
• A safe lubricant film at high operating temperatures.
• Low evaporative tendency, so lower oil consumption.
• No deposits in combustion chambers, in the piston ring zone and valves because of oil conditioned.
• Neutrality towards sealing materials.
• Extended oil change intervals to protect natural resources.

Category: Passenger car motor oil

Item number: 1111136

Viscosity: 5W-40

Specification: ACEA A3/B4, API SN Plus, API SP

Oil type: Full synthetic

Approvals: API SN Plus, API SP, BMW Longlife-01, MB-Freigabe 229.5, Renault RN0700/RN0710, VW 502 00, VW 505 00

Recommendation: Chrysler MS-10725, Chrysler MS-10850, Chrysler MS-12991 (MS-10896), Fiat 9.55535-Z2, MB 226.5, MB 229.3, Opel/GM-LL-B-025, Porsche A40, PSA B71 2296

Application: Passenger car

Technology: Clean Synto®, USVO®

RAVENOL VollSynth Turbo VST SAE 5W-40 is a PAO (Polyalphaolefin) based, full synthetic low friction motor oil with especially USVO® and proven CleanSynto® technology for passenger car petrol and diesel engines with and without turbo-charging and direct injection.

Due to the USVO® technology we achieve an extremely high viscosity stability. We avoid the disadvantages of polymeric viscosity improvers while taking advantage of them. This improves engine protection, performance, engine cleanliness and oil drain intervals. The USVO® technology makes it possible that the product has no shear losses during the entire change interval and is extremely stable to oxidation. This unique technology helps oil lubricate faster, thereby minimizing friction while keeping the engine clean and efficient.

RAVENOL VollSynth Turbo VST SAE 5W-40 minimizes friction, wear and fuel consumption with excellent cold start characteristics.

RAVENOL VollSynth Turbo VST SAE 5W-40 guarantees operational safety concerning all driving conditions as for example regarding extreme stop and go traffic as well as high speed drives on motorways.

Extended oil change intervals according to the manufacturer’s instructions.

Application Note

RAVENOL VollSynth Turbo VST SAE 5W-40 is suitable for the energy saving operation all the year of all modern cars with petrol and diesel engines in passenger cars, vans, small transporters and similar vehicles and was specially developed for turbo chargers as well as the catalytic operation.

Characteristics

• High abrasion resistance.
• Fuel saving because of easy running characteristics.
• Excellent detergent and dispersant characteristics.
• Prevention of black sludge creation.
• Long endurance because of high oxidation stability.
• Excellent cold start performance.
• Very good viscosity temperature behaviour.
• Low evaporation.
• Suitable for catalysts.

Category: Passenger car motor oil

Item number: 1111130

Viscosity: 5W-40

Specification: ACEA A3/B4, API CF, API SN Plus, API SP

Oil type: Full synthetic

Approvals: API SN Plus, API SP, MB-Freigabe 229.3, Porsche A40, Renault RN0700/RN0710, VW 502 00, VW 505 00

Recommendation: BMW Longlife-01, Chrysler MS-10850, Chrysler MS-10896, Fiat 9.55535-H2, MB 226.5, Opel/GM-LL-B-025, PSA B71 2296

Application: Passenger car

Technology: Clean Synto®

RAVENOL VSI SAE 5W-40 is a PAO (Polyalphaolefin) based, full synthetic motor oil with proven CleanSynto® technology for passenger car petrol and diesel engines with and without turbo-charging and direct injection.

With its formulation, RAVENOL VSI SAE 5W-40 provides a safe layer of lubrication even at very high operating temperatures and protects from corrosion and loss of oil through oxidation or coking. The excellent cold start behavior ensures optimum lubrication safety during the cold running phase.

By significantly reducing fuel consumption, RAVENOL VSI SAE 5W-40 helps to protect the environment by reducing emissions. It guarantees operational safety in all driving conditions, such as extreme stop-and-go traffic as well as high-speed highway driving.

RAVENOL VSI SAE 5W-40 minimizes friction, wear and fuel consumption with excellent cold start characteristics.

Extended oil change intervals according to the manufacturer’s instructions.

Application Note

RAVENOL VSI SAE 5W-40 is suitable for the energy saving operation all the year of all modern cars with petrol and diesel engines and was specially developed for turbo chargers as well as the catalytic operation.

Characteristics

• High abrasion resistance.
• Fuel saving because of easy running characteristics.
• Excellent detergent and dispersant characteristics.
• Prevention of black sludge creation.
• Long endurance because of high oxidation stability.
• Excellent cold start performance.
• Very good viscosity temperature behaviour.
• Low evaporation.
• Suitable for catalysts.

Category: Passenger car motor oil

Item number: 1111133

Viscosity: 5W-40

Specification: ACEA C3, API CF, API SN

Oil type: Synthetic

Approvals: API SN, BMW Longlife-04, GM dexos2™ (Lizenz-Nr. D20583HI081), MB-Freigabe 229.31, MB-Freigabe 229.51, VW 505 00, VW 505 01

Recommendation: Chrysler MS-11106, Fiat 9.55535-GH2, Fiat 9.55535-S2, Ford WSS-M2C917-A, Porsche A40, VW 502 00

Application: Passenger car

Technology: Clean Synto®

RAVENOL VMO SAE 5W-40 is a synthetic Mid SAPS low friction motor oil with CleanSynto® technology for passenger car gasoline and diesel engines with and without turbo-charging and direct injection.

RAVENOL VMO SAE 5W-40 achieves a high viscosity index through its formulation with special base oils. The excellent cold start behaviour provides an optimum lubricating safety during the cold run phase.

RAVENOL VMO SAE 5W-40 extends long life of DPF and TWC. Developed for fuel economy and energy conserving in EURO VI, EURO V and EURO IV Standard engines with normal and extended oil change intervals (until 50.000 km or 2 years possible).

RAVENOL VMO SAE 5W-40 minimizes friction, wear and fuel consumption with excellent cold start characteristics. Because of a considerable fuel saving RAVENOL VMO SAE 5W-40 contributes to protect the environment by reducing the emissions.

Suitable for extended oil change intervals where recommended by manufacturer.

Application Note

RAVENOL VMO SAE 5W-40 is an universal, synthetic low friction motor oil especially developed for Pumpe-Düse-diesel engines. Moreover, this lubricant is excellent suitable for gasoline and diesel engines in passenger cars and vans with and without turbo charger. Due to the specific composition is RAVENOL VMO SAE 5W-40 excellent suitable for use for several OEM requirements.

Characteristics

• Fuel economy in part and full power operation.
• MID SAPS = reduced Sulphated Ash, Phosphorous and Sulphur.
• Excellent wear protection and high viscosity index also under high-speed driving conditions, the long life of the engine.
• Excellent cold starting characteristics also at low temperatures below -30°C.
• The function of the hydro tappet is ensure at all temperatures.
• A safe lubricant film at high operating temperatures.
• Low evaporative tendency, so lower oil consumption.
• No deposits in combustion chambers, in the piston ring zone and valves because of oil conditioned.
• Neutrality towards sealing materials.
• Extended oil change intervals to protect natural resources.

RAVENOL VMO SAE 5W-40 er en syntetisk Mid SAPS lavfriktionsmotorolie med CleanSynto®-teknologi til benzin- og dieselmotorer i personbiler med og uden turboladning og direkte indsprøjtning.

RAVENOL VMO SAE 5W-40 opnår en høj viskositetsindeks gennem sin formulering med særlige basisolier. Den fremragende koldstartadfærd giver optimal smøresikkerhed under koldkørselsfasen.

RAVENOL VMO SAE 5W-40 forlænger levetiden for DPF og TWC. Udviklet til brændstoføkonomi og energibesparelse i EURO VI, EURO V og EURO IV standardmotorer med normale og forlængede olieskiftintervaller (op til 50.000 km eller 2 år muligt).

RAVENOL VMO SAE 5W-40 minimerer friktion, slid og brændstofforbrug med fremragende koldstartsegenskaber. På grund af en betydelig brændstofbesparelse bidrager RAVENOL VMO SAE 5W-40 til at beskytte miljøet ved at reducere emissionerne.

Egnet til forlængede olieskiftintervaller, hvor det anbefales af producenten.

Anvendelsesnotat RAVENOL VMO SAE 5W-40 er en universal, syntetisk lavfriktionsmotorolie, der er specielt udviklet til Pumpe-Düse-dieselmotorer. Desuden er denne smøreolie fremragende egnet til benzin- og dieselmotorer i personbiler og varevogne med og uden turbolader. På grund af sin specifikke sammensætning er RAVENOL VMO SAE 5W-40 fremragende egnet til brug i flere OEM-krav.

Egenskaber

• Brændstoføkonomi i både del- og fuldkraftdrift.
• MID SAPS = reduceret sulfat-aske, fosfor og svovl.
• Fremragende slidbeskyttelse og høj viskositetsindeks, selv under høje hastighedsforhold, hvilket forlænger motorens levetid.
• Fremragende koldstartsegenskaber, selv ved lave temperaturer under -30°C.
• Hydrotrykstøtter fungerer ved alle temperaturer.
• En sikker smørefilm ved høje driftstemperaturer.
• Lav fordampningstendens, hvilket resulterer i lavere olieforbrug.
• Ingen aflejringer i forbrændingskamre, i stempelringszoner og ventiler på grund af oliens sammensætning.
• Neutralitet over for tætningsmaterialer.
• Forlængede olieskiftintervaller for at beskytte naturressourcerne.

Category: Passenger car motor oil

Item number: 1111136

Viscosity: 5W-40

Specification: ACEA A3/B4, API SN Plus, API SP

Oil type: Full synthetic

Approvals: API SN Plus, API SP, BMW Longlife-01, MB-Freigabe 229.5, Renault RN0700/RN0710, VW 502 00, VW 505 00

Recommendation: Chrysler MS-10725, Chrysler MS-10850, Chrysler MS-12991 (MS-10896), Fiat 9.55535-Z2, MB 226.5, MB 229.3, Opel/GM-LL-B-025, Porsche A40, PSA B71 2296

Application: Passenger car

Technology: Clean Synto®, USVO®

RAVENOL VollSynth Turbo VST SAE 5W-40 is a PAO (Polyalphaolefin) based, full synthetic low friction motor oil with especially USVO® and proven CleanSynto® technology for passenger car petrol and diesel engines with and without turbo-charging and direct injection.

Due to the USVO® technology we achieve an extremely high viscosity stability. We avoid the disadvantages of polymeric viscosity improvers while taking advantage of them. This improves engine protection, performance, engine cleanliness and oil drain intervals. The USVO® technology makes it possible that the product has no shear losses during the entire change interval and is extremely stable to oxidation. This unique technology helps oil lubricate faster, thereby minimizing friction while keeping the engine clean and efficient.

RAVENOL VollSynth Turbo VST SAE 5W-40 minimizes friction, wear and fuel consumption with excellent cold start characteristics.

RAVENOL VollSynth Turbo VST SAE 5W-40 guarantees operational safety concerning all driving conditions as for example regarding extreme stop and go traffic as well as high speed drives on motorways.

Extended oil change intervals according to the manufacturer’s instructions.

Application Note

RAVENOL VollSynth Turbo VST SAE 5W-40 is suitable for the energy saving operation all the year of all modern cars with petrol and diesel engines in passenger cars, vans, small transporters and similar vehicles and was specially developed for turbo chargers as well as the catalytic operation.

Characteristics

• High abrasion resistance.
• Fuel saving because of easy running characteristics.
• Excellent detergent and dispersant characteristics.
• Prevention of black sludge creation.
• Long endurance because of high oxidation stability.
• Excellent cold start performance.
• Very good viscosity temperature behaviour.
• Low evaporation.
• Suitable for catalysts.

Category: Passenger car motor oil

Item number: 1111130

Viscosity: 5W-40

Specification: ACEA A3/B4, API CF, API SN Plus, API SP

Oil type: Full synthetic

Approvals: API SN Plus, API SP, MB-Freigabe 229.3, Porsche A40, Renault RN0700/RN0710, VW 502 00, VW 505 00

Recommendation: BMW Longlife-01, Chrysler MS-10850, Chrysler MS-10896, Fiat 9.55535-H2, MB 226.5, Opel/GM-LL-B-025, PSA B71 2296

Application: Passenger car

Technology: Clean Synto®

RAVENOL VSI SAE 5W-40 is a PAO (Polyalphaolefin) based, full synthetic motor oil with proven CleanSynto® technology for passenger car petrol and diesel engines with and without turbo-charging and direct injection.

With its formulation, RAVENOL VSI SAE 5W-40 provides a safe layer of lubrication even at very high operating temperatures and protects from corrosion and loss of oil through oxidation or coking. The excellent cold start behavior ensures optimum lubrication safety during the cold running phase.

By significantly reducing fuel consumption, RAVENOL VSI SAE 5W-40 helps to protect the environment by reducing emissions. It guarantees operational safety in all driving conditions, such as extreme stop-and-go traffic as well as high-speed highway driving.

RAVENOL VSI SAE 5W-40 minimizes friction, wear and fuel consumption with excellent cold start characteristics.

Extended oil change intervals according to the manufacturer’s instructions.

Application Note

RAVENOL VSI SAE 5W-40 is suitable for the energy saving operation all the year of all modern cars with petrol and diesel engines and was specially developed for turbo chargers as well as the catalytic operation.

Characteristics

• High abrasion resistance.
• Fuel saving because of easy running characteristics.
• Excellent detergent and dispersant characteristics.
• Prevention of black sludge creation.
• Long endurance because of high oxidation stability.
• Excellent cold start performance.
• Very good viscosity temperature behaviour.
• Low evaporation.
• Suitable for catalysts.

Category: Passenger car motor oil

Item number: 1111136

Viscosity: 5W-40

Specification: ACEA A3/B4, API SN Plus, API SP

Oil type: Full synthetic

Approvals: API SN Plus, API SP, BMW Longlife-01, MB-Freigabe 229.5, Renault RN0700/RN0710, VW 502 00, VW 505 00

Recommendation: Chrysler MS-10725, Chrysler MS-10850, Chrysler MS-12991 (MS-10896), Fiat 9.55535-Z2, MB 226.5, MB 229.3, Opel/GM-LL-B-025, Porsche A40, PSA B71 2296

Application: Passenger car

Technology: Clean Synto®, USVO®

RAVENOL VollSynth Turbo VST SAE 5W-40 is a PAO (Polyalphaolefin) based, full synthetic low friction motor oil with especially USVO® and proven CleanSynto® technology for passenger car petrol and diesel engines with and without turbo-charging and direct injection.

Due to the USVO® technology we achieve an extremely high viscosity stability. We avoid the disadvantages of polymeric viscosity improvers while taking advantage of them. This improves engine protection, performance, engine cleanliness and oil drain intervals. The USVO® technology makes it possible that the product has no shear losses during the entire change interval and is extremely stable to oxidation. This unique technology helps oil lubricate faster, thereby minimizing friction while keeping the engine clean and efficient.

RAVENOL VollSynth Turbo VST SAE 5W-40 minimizes friction, wear and fuel consumption with excellent cold start characteristics.

RAVENOL VollSynth Turbo VST SAE 5W-40 guarantees operational safety concerning all driving conditions as for example regarding extreme stop and go traffic as well as high speed drives on motorways.

Extended oil change intervals according to the manufacturer’s instructions.

Application Note

RAVENOL VollSynth Turbo VST SAE 5W-40 is suitable for the energy saving operation all the year of all modern cars with petrol and diesel engines in passenger cars, vans, small transporters and similar vehicles and was specially developed for turbo chargers as well as the catalytic operation.

Characteristics

• High abrasion resistance.
• Fuel saving because of easy running characteristics.
• Excellent detergent and dispersant characteristics.
• Prevention of black sludge creation.
• Long endurance because of high oxidation stability.
• Excellent cold start performance.
• Very good viscosity temperature behaviour.
• Low evaporation.
• Suitable for catalysts.